The following chapters describe the configuration based on GUI.
Note
To change the device configuration, you must log in with the user name  . If you
do not know the password, you cannot make any configuration settings. This applies to
all types of configuration.
8.3.1 GUI (Graphical User Interface)
The GUI is a web-based graphic user surface that you can use from any PC with an up-
to-date Web browser via an HTTP or HTTPS connection.
With the GUI you can perform all the configuration tasks easily and conveniently. It is integ-
rated in your device and is available in English. If required, other languages can be down-
loaded from the download areaSoftware &Configuration on page 508 ofwww.teldat.de and
installed on your device. To do this, proceed as described in Options on page 508.
The settings you make with the GUI are applied with the OK or Apply button of the menu,
and you do not have to restart the device.
If you finish the configuration and want to save your settings so that they are loaded as the
boot configuration when you reboot your device, save these by clicking the Save configur-
ation button.
You can also use the GUI to monitor the most important function parameters of your
device.
Teldat GmbH
8 Access and configuration
bintec Rxxx2/RTxxx2 57
To Next Page
Loading...
Need help?
General
