Field Value
• 8 : Messages with emergency, alert, critical, error and
warning priority are recorded.
• '": Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
• ! (default value): Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
• .3 : All messages are recorded.
Maximum Number of
Accounting Log
Entries
Enter the maximum number of accounting entries that are
stored internally in the device.
Possible values are to .
The default value is .
Manual WLAN Control-
ler IP Address
The feature is only for devices with WLAN controller available.
Enter the IP address of the WLAN controller.
The value can only be modified it the the WLAN controller func-
tion is enabled.
LED Mode The feature is only for W1003n, W2003n, W2003n-ext and
W2004n available.
Select the lighting scheme of the LEDs.
Possible values:
• *3# (default value): Only the status LED flashes once per
second.
• 9,# : All LEDs show their standard behavior.
• :!!: All LEDs are deactivated.
10.2.2 Passwords
Setting the passwords is another basic system setting.
Teldat GmbH
10 System Management
bintec Rxxx2/RTxxx2 75
To Next Page
Loading...
Need help?
General
