Field Value
System Name Enter the system name of your device. This is also used as the
PPP host name.
A character string with a maximum of 255 characters is pos-
sible.
The device type is entered as the default value.
Location Enter the location of your device.
Contact Enter the relevant contact person. Here you can enter the e-
mail address of the system administrator, for example.
A character string with a maximum of 255 characters is pos-
sible.
The default value is (/.-(.
Maximum Number of
Syslog Entries
Enter the maximum number of syslog messages that are stored
internally in the device.
Possible values are  to .
The default value is . You can display the stored messages in
Monitoring->Internal Log.
Maximum Message
Level of Syslog Entries
Select the priority of system messages above which a log
should be created.
System messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at .3 syslog level.
Possible values:
•  "&: Only messages with emergency priority are re-
corded.
• -,: Messages with emergency and alert priority are recor-
ded.
• 2",: Messages with emergency, alert and critical prior-
ity are recorded.
• : Messages with emergency, alert, critical and error pri-
ority are recorded.
10 System Management Teldat GmbH
74 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
