Field Description
Client Type Select whether the PPPoA connection is to be set up perman-
ently or on demand.
Possible values:
• : . (default value): The PPPoA is only set up on de-
mand, e.g. for Internet access.
You'll find additional information on PPP over ATM under
PPPoA on page 282.
17.2.2 Service Categories
In the WAN->ATM->Service Categories menu is displayed a list of already configured
ATM connections (PVC, Permanent Virtual Circuit) to which specific data traffic parameters
were assigned.
Your device supports QoS (Quality of Service) for ATM interfaces.
Caution
ATM QoS should only be used if your provider specifies a list of data traffic parameters
(traffic contract).
The configuration of ATM QoS requires extensive knowledge of ATM technology and
the way the Teldat devices function. An incorrect configuration can cause considerable
disruption during operation. If applicable, save the original configuration on your PC.
17.2.2.1 New
Choose the New button to create additional categories.
Teldat GmbH
17 WAN
bintec Rxxx2/RTxxx2 309
To Next Page
Loading...
Need help?
General
