Field Description
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are to $.
Source Port Range Only for Protocol = (2, 0.5(2 or 0.
In the first field, enter the source port to be checked, if applic-
able.
If a port number range is specified, in the second field enter the
last port of the port range. By default the field does not contain
an entry. If a value is displayed, this means that the previously
specified port number is verified. If a port range is to be
checked, enter the upper limit here.
Possible values are to $.
Type
Only for Protocol = 2%
The Type field shows the class of ICMP messages, the Code
field specifies the type of message in greater detail.
Possible values:
• -& (default value)
• " @),&
• .# 3",
• *3" D3"
• @"
• "
• ( <"
• ,
• (#)
• (#) @),&
• ! @F3#
• ! @),&
• -## %#7 @F3#
• -## %#7 @),&
Teldat GmbH
19 Firewall
bintec Rxxx2/RTxxx2 395
To Next Page
Loading...
Need help?
General
