Field Description
• (#: Accessibility of an IP address is checked.
• 2!" % : A certificate is to be renewed,
deleted or entered.
• ?G 8/-' =#": A scan of the 5 GHz frequency
band is performed.
• ?G 8/-' =#": A scan of the 5.8 GHz fre-
quency range is performed.
• 8/24 '1 ' *": Only for devices with Wireless
LAN Controller. A Neighbor Scan is initiated in a WLAN net-
work controlled by the WLAN controller.
• 8/24 6** *: Only for devices with Wireless LAN Con-
troller. The status of a wireless network is modified.
Event List
Select the event list you want which has been created in Local
Services->Scheduling->Trigger.
Event List Condition
For the selected chains of events, select how many of the con-
figured events must occur for the operation to be initiated.
Possible values:
• -,, (default value): The operation is initiated if all events oc-
cur.
• :: The operation is initiated if a single event occurs.
• ': The operation is initiated if none of the events occurs.
• : : The operation is initiated if one of the events does
not occur.
Reboot device after
Only if Command Type = @
Enter the timespan in seconds that must elapse after occur-
rence of the event until the device is restarted.
The default value is seconds.
MIB/SNMP Variable to
add/edit
Only if Command Type = %=5*'%
Select the MIB table in which the MIB variable whose value
shall be changed is saved. First, select the System, then the
MIB Table. Only the MIB tables present in the respective area
are displayed.
21 Local Services Teldat GmbH
468 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
