Field Description
If the MIB variable is to be modified, depending on whether the
initiator is active or inactive (Trigger Status =), it is de-
scribed with an active initiator with the value entered in Active
Value and with an inactive initiator with the value in Inactive
Value.
Use Add to create more entries.
Interface
Only if Command Type = !" *3#
Select the interface whose status should be changed.
Set interface status
Only if Command Type = !" *3#
Select the status to be set for the interface.
Possible values:
• 0) (default value)
• .1
• @#
Source Location
Only if Command Type = *!1 0)
Select the source for the software update.
Possible values:
• 23 *!1 ! (, * (default
value): The latest software will be downloaded from the Teldat
server.
• ?(( *: The latest software will be downloaded from
an HTTP server that you define in * 0@/.
• ?((* *: The latest software will be downloaded from
an HTTPS server that you define in * 0@/.
• (9( *: The latest software will be downloaded from
an TFTP server that you define in * 0@/.
Server URL
For Command Type = *!1 0)
if Source Location not 23 *!1 ! (,
*.
21 Local Services Teldat GmbH
470 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
