Field Description
Possible values:
• ' (default value): The server accepts and send emails
without further authentication.
• *%(: The server only accepts e-mails if the router logs in
with the correct user name and password.
• *%( ! :: The server requires that e-mails are
called via POP3 by the sending IP with the correct POP3 user
name and password before sending an e-mail.
User Name
Only if SMTP Authentication = *%( or *%( ! :
Enter the user name for the POP3 or SMTP server.
Password
Only if SMTP Authentication = *%( or *%( ! :
Enter the password of this user.
POP3 Server
Only if SMTP Authentication = *%( ! :
Enter the address of the server from which the e-mails are to be
retrieved.
POP3 Timeout
Only if SMTP Authentication = *%( ! :
Enter how long the router must wait after the POP3 call before it
is forced to send the alert mail.
The default value is seconds.
Fields in the SMS Parameters menu (only for RS120wu, RS230au+ and RS230bu+)
Field Description
SMS Device You can receive notification of system alerts in text messages.
Select the device to be used to send the text message.
Maximum SMS per Day Limit the maximum number of SMS sent during a single day.
Activating ' / allows any number of SMS to be
sent.
The defualt value is 10 SMS per day.
Note: Entering a value of is equivalent to activating ' /
.
23 External Reporting Teldat GmbH
524 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
