Teldat Regesta Smart PRO User Manual

• AC Version ("AC" models)
• Nominal: 110 - 240 VAC
• Absolute: 85 - 264 VAC
• Frequency : 50 - 60 Hz
• Power: 10 W
• DC Version ("DC" models)
• Nominal: 12 - 72 VDC
• Absolute: 9 - 80 VDC
• Power: 10 W
• MR Version ("MR" models)
• Nominal: 110 - 240 VAC, 48 - 72 VDC
• Absolute: 85 - 264 VAC, 40 - 85 VDC
• Frequency : 50 - 60 Hz (VAC)
• Power: 10 W
• Dying Gasp Alarm to report power failures or removal of the power supply cable. An additional accessory is re-
quired for this function.
• LAN: RJ45 connector will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX,
and 1000Base-T
• WAN: Gigabit Ethernet Combo RJ45+SFP connector:
• RJ45 connector will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX, and
1000Base-T.
• SFP port will support 1000Base-X Fiber Ethernet standard SFP.
• Switch: Depending on the model. ("6" Models)
• 4xRJ45 connectors will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX,
and 1000Base-T.
• Serial Ports.
• 1xRJ45 connector RS-232 port (DCE).
• 2xRJ45 connectors for RS-232 port (DCE) and/or RS-485 (2/4 wires). An additional accessory is required for this
function.
• WWAN: Depending on the model. ("L" models)
• 1xLTE Category 4 WWAN module with two SMA connectors.
• 2 Internal SIM trays with 2FF form factor.
• External Reset/Recovery push button
2.4 Components
2.4.1 Front panel
The front panel includes the status LEDs.
The following figure shows the front panel.
2 Product Overview Teldat S.A.
8 Regesta Smart PRO

Teldat Regesta Smart PRO Specifications

General

Brand	Teldat
Model	Regesta Smart PRO
Category	Network Hardware
Language	English