Tenda F3 User Manual

35
❷ Primary DNS Address: Enter the preferred address of the DNS server provided by your ISP.
❸ Alternate DNS Address (optional): Enter the alternate DNS address if your ISP provides this
address.
❹ Click OK and go to the Tools page to reboot the device to activate these new DNS settings.
DHCP Server
DHCP server can automatically assign the broadband service info (IP Address, Subnet Mask,
Gateway and DNS Server Address) to the computer or smart phone, or other devices which are
connected to the Router. Do not disable this function until you want to configure the IP address
manually for each device connected to the Router.
Click Advanced > DHCP Server to modify the IP range and the lease time.
❶ DHCP Server: Check Enable. (It’s enabled by default.)
❷ IP Pool Start/End Address: Configure the rightmost segment of the start address/end address,
say 100/150 shown in the picture.
❸ Lease Time: Select the lease time of the IP assigned automatically, say One day. When the
lease time is used up, the IP will renew automatically. So you don’t need to reset it manually.
❹ Click OK.
DHCP Client List
This feature includes two parts, Static Assignment and DHCP Client List.

Tenda F3 Specifications

General

Color	white
Wi-Fi Speed	300 megabits per second
Band Technology	single
Frequency Band	2.4 ghz
Beamforming	yes
Ethernet Standard	10/100
Ethernet Switch	yes
Wireless Standard	n
Antennas	3
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa-psk, wpa2, wpa2-psk
Security Features	wpa algorithm: aes, tkip, tkip&aes; wireless access control: mac address filtering
Ports	rj-45
LAN Ports	3
WAN Ports	1

Weight and Dimensions

Height	1.02 inches
Width	5.02 inches