Tenda F3 User Manual

60
broadband service is 4M, so the download speed is up to 512KByte/s (4 * 128KByte=512). On the
other hand, 256~512KByte/s are sufficient for you to watch smooth HD videos.
 Enable: Check the Enable box to enable all the settings in this rule.
 Click Add to List. You can view the rule in the table, shown as the figure below. The icon “√”
indicates the rule is enabled. If it’s “×”, the rule is not enabled.
 Click OK.
Traffic Statistics
Here you can view how much traffic each device is using via your Router.
Enable Traffic Statistics: Check the box to enable Traffic Statistics feature, to see at a glance how
much traffic each device in your network is using. When the option is enabled, the page will refresh
every five minutes.
This option is disabled by default. Disabling it may boost your network. Suggest you only enable it
if necessary. Statistics you can see on the list:

Tenda F3 Specifications

General

Color	white
Wi-Fi Speed	300 megabits per second
Band Technology	single
Frequency Band	2.4 ghz
Beamforming	yes
Ethernet Standard	10/100
Ethernet Switch	yes
Wireless Standard	n
Antennas	3
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa-psk, wpa2, wpa2-psk
Security Features	wpa algorithm: aes, tkip, tkip&aes; wireless access control: mac address filtering
Ports	rj-45
LAN Ports	3
WAN Ports	1

Weight and Dimensions

Height	1.02 inches
Width	5.02 inches