DIGGER DERRICK
1-77
Digger Derrick Terex South Dakota, Inc. 463280 - 9/14
OPERATION GUIDELINES
LEAVING THE JOB SITE
When leaving the job site, do the following:
1. If the Digger Derrick was used with the aerial platform, remove the platform and store the control
package on the lower boom bracket.
2. Fully retract all boom sections. If equipped with manual fiberglass extension, pull retaining pin and return
to the stored position. Reinstall the retaining pin.
3. Place boom in the boom rest.
4. Retract all outriggers and properly store outrigger pads and wheel chocks.
5. Stow all loose items or equipment.
6. Disengage PTO to prevent damage.
7. Shut off master switch, if so equipped.
8. Turn off warning lights.
9. Make final inspection that everything is stored properly.
10. Disengage brakes.
11. When traveling, remember the overall height of the vehicle.
12. Report any operational problems during operation to qualified personnel for evaluation and repair.
13. Follow the vehicle manufacturer’s instructions for operating the vehicle.
DRIVE CAREFULLY!
To Next Page
Loading...
Need help?
General
