2.8 Stability
The machine must always be operated with caution in order to maximize machine
stability and guard against the possibility of a rollover.
• Travel only at speeds appropriate for the local conditions.
• Do not exceed the operating capacity of the machine.
• Exercise extreme caution while operating on inclines.
• Avoid operation on steep inclines.
• Do not make sudden changes in direction, move slowly, and always carry
loads low to maximize machine stability.
• Always keep the heaviest end of the machine facing uphill when travelling
on an incline.
• When operating on any surface other than firm and level ground, use extra
caution. Decrease work speeds, limit load size and make any other
necessary adjustments to maximize your safety and that of others in the
work area.
2.9 Transporting Persons
• The machine must not be used to transport persons.
17
R160T / R190T US O&M
0404-490 2014-06
To Next Page
Loading...
Need help?
General
