2.14 Jobsite Safety
• Before beginning work, become acquainted with any special features or
requirements of the work site. These may include, for example, obstructions
in the work area, the carrying capacity of the ground and requirements to
close the work site off from public traffic.
• Always maintain an adequate safety distance to overhanging features,
edges, embankments and unsafe surfaces.
• Be especially cautious if visibility is poor, light conditions are low or soil
conditions vary.
• Become acquainted with the location of supply lines at the work site and be
especially careful when working close to them. Consult appropriate local
authorities for necessary information regarding any such lines prior to
commencing work.
• Keep the machine at an adequate distance from overhead electrical lines.
When working in the vicinity of overhead electrical lines, do not come close
to the lines with the machine. Injury or death may result! If possible, have
the current turned off or line re-routed prior to beginning work.
• In the event electrical current jumps from a line to the machine, follow
these rules:
• do not perform any movements with the machine
• do not leave the cab
• warn persons outside not to approach or touch the machine
• have the current turned off immediately
• Always turn on the appropriate lighting when visibility is poor or light
conditions are low.
• Do not allow any passengers in or on the machine.
• Stay seated with the seat belt fastened while working.
• Report any operating faults immediately. Make sure any necessary repairs
are performed prior to resuming operation.
• Never leave the machine unattended with the engine running.
21
R160T / R190T US O&M
0404-490 2014-06
To Next Page
Loading...
Need help?
General
