7.3 Maintenance Intervals
7.3-1 Daily Maintenance Tasks
7.3-2 50-1000 hour Tasks
64
Page
1 Check hydraulic oil level (figure 7.7-3, p-68) 68
2 Check engine oil level 66
3 Check fuel level (gauge on instrument panel) 37
4 Check fan belt tension / condition 69
5 Check track tension / condition 71
6 Check for proper control operation 40
7 Check for proper switch and lighting operation 37
8 Check / clean air cleaner elements 74
9 General visual check for cracks, damage, completeness 20,47
10 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc. 18,27,47
11 Drain water separator 70
12 Lubricate all grease points 65
13 Inspect / clean the radiator/cooler and engine compartment 76-77
Dail
Page
1 Inspect drive sprocket rollers (replace as needed) 73
Page
1 Replace engine oil & filter 67
2 Replace hydraulic filter(s) 69
Page
1 Replace fuel filter element 70
Page
1 Replace hydraulic oil 68
2 Replace engine coolant (use SCA additive, see engine manual) 76
Every 50 operating hours
Every 250 operating hours
Every 500 operating hours
Every 1000 operating hours
R160T / R190T US O&M
0404-490 2014-06
To Next Page
Loading...
Need help?
General
