10
Fluid Recommendations
Fuel
Unleaded regular gasoline recommended to minimize
engine intake valve and combustion chamber deposits.
Engine Oil
Service classification API SF, SG, SF/CC or SG/CC in a 30
weight viscosity grade.
Engine Oil Filter
Order Part No. 57-8530
Hydraulic Oil Filter
Order Part No. 67-8110
Hydraulic Oil
Mobil DTE 26 or other interchangeable equivalent. See the
chart below for equivalent oils.
Mobil DTE 26
Shell Tellus 68
Amoco Rykon Oil #68
Conoco Super Hydraulic Oil 68
Exxon Nuto H 68
Kendall Kenoil R&O 68
Pennzoil Penreco 68
Phillips Magnus A 68
Standard Energol HLP 68
Sun Sunvis 831 WR
Union Unax AW 68
Water Pump Case Oil
Mobil DTE Extra Heavy or other interchangeable ISO
Grade 150 PE-700-A (Heavy Inhibited Hydraulic &
General Purpose). See the chart below for equivalent oils.
Mobil DTE EH (Extra Heavy)
Shell Turbo 150
Amoco American Ind. Oil 150
Chevron AW Machine Oil 150
Conoco Dectol R & O 150
Exxon Terresstic 150
Kendall Ken-Tran 080
Pennzoil Penreco 150/AW 150
Phillips Magnus Oil 150
Standard Energol HLP 150
Sun Sunvis 150
Union Unax RX 150/Turbine Oil 150
Valvoline ETC (R&O) #70
Water Supply
Recommended source with 7–8 gallons per minute. A
minimum pressure of 30 psi at the machine is required for
the pump to engage. Maximum allowable pressure of 200
psi. Although irrigation water pumped from ponds or
effluent holding pools can be used, not all conditions can be
handled by the filtration system. Additional or alternative
filtration may be required.
Water Filter Cartridge
Order Part No. 86-8630
Important Do not use chemicals! Concern for
environmental issues and corrosive affects on machine
components.
To Next Page
Loading...
Need help?
General
