102
Using the TV’s features
Setting the sleep timer
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1 Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
2 Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the ( / arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1 Press the MENU button and open the Setup menu.
2 Highlight Sleep Timer and press the ENTER button.
3 Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press the ENTER button.
Or press the ( / arrow) buttons to increase or decrease in
10-minute increments, to a maximum of 12 hours.
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to
0 minutes.
Automatic Power Down
The TV can be configured to automatically turn itself off after
4 hours if you do not operate the TV either from the remote control
or the TV control panel.
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the ( / arrow) buttons to select Automatic Power
Down.
3 Press the ( / arrow) buttons to select On or Off, and press
EXIT.
To Next Page
Loading...
Need help?
General