94
Using the TV’s features
Using the PC Settings feature
* The default settings and/or adjustment ranges may vary depending on the
input signal format.
Setting the PC Audio
You can output or mute sound from your computer when
connecting it to your TV using the PC IN terminal and an analog
RGB cable. For more information, see “Connecting a computer to
the TV’s PC IN terminal” on page 32.
To set the PC Audio:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 Press the ( / arrow) buttons to select PC Audio, and then
press the ( / arrow) buttons to select Ye s or No.
❖ Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
❖ No: When viewing the PC input, there will be no audio.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No,” then the HDMI 1
Audio setting changes to “Auto.” If PC Audio is set to “Yes,” then the
HDMI 1 Audio setting is set to “Digital” and is grayed out in the
menu. (See also “Setting the HDMI
®
audio mode” on page 50.)
Vertical Position Moves the picture up/down. The adjustment range is within ±10 from
center.*
Clock Phase Helps to reduce noise and sharpen the picture. The adjustment range is
within ±16 from center.*
Sampling Clocks Helps to reduce noise and minimize periodic vertical stripes on the
screen. The adjustment range is within ±10 from center.*
Reset Highlight this item, and then press the ENTER button to get an
optimum adjustment automatically.
Mode: Description:
To Next Page
Loading...
Need help?
General