44
Chapter 5
Setting up your TV
Initial Setup
When you first turn on or reset the TV, the Initial Setup window
will appear.
1 In the Menu Language field, press the ( / arrow) buttons to
select your preferred language.
2 Press the ( / arrow) buttons to select Time Zone Setup.
Then set your desired time zone, using the ( / arrow)
buttons and press the ENTER button.
The Location settings window appears.
3 For normal home use, press the ( / arrow) buttons to select
Home, and then press the ENTER button.
The ANT/CABLE In setup window appears.
4 Press the ( / arrow) buttons to select the input source
(Cable or Antenna), and then press ENTER.
5 Press the ENTER button to select Start Scan and continue
with the Auto Tuning.
You can stop the Initial Setup by pressing the EXIT button.
However if you do not finish the entire Initial Setup process and
press the POWER button before completing all the steps, the Initial
Setup window will appear every time you turn on the TV until
initial setup is complete.
To Next Page
Loading...
Need help?
General