103
Using the TV’s features
No Signal Power Down
The default setting of this feature is Off.
One minute before the TV switches to standby, a warning message
will appear.
When the following features are set, the feature that is set for the
nearest time will function.
❖ Automatic Power Down
❖ Sleep Timer
❖ No signal auto power off (after 15 minutes of no signal)
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
❖ Low signal strength of analog channel (no signal detection)
❖ Only Audio L/R is connected to external input to listen to
music through the TV speakers.
To change the No Signal Power Down setting:
1 From the Preferences menu, highlight Energy Saving
Settings, and then press ENTER.
2 Press the ( / arrow) buttons to select No Signal Power
Down, and then press ENTER.
3 Press the ( / arrow) buttons to highlight the item you want
to change, and then press the ( / arrow) buttons to select On
or Off.
❖ Default setting for this feature is On.
❖ A warning message will appear 1 minute before the TV turns off.
Using HDMI
®
CEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
®
CEC compatible devices from the TV
remote via HDMI
®
connection (see “HDMI
®
CEC connection” on
page 29).
When Enable HDMI
®
CEC in the HDMI
®
CEC Setup menu is set
to On (see “Setting up HDMI
®
CEC” on page 107), the HDMI
®
CEC functions described below will be enabled.
To Next Page
Loading...
Need help?
General