Toshiba 55WL800AZ User Manual

59
Connecting your TV
Wireless Information
The settings congured in Wireless Setup can be
conrmed.
1
From the
Quick Menu
, press
s
or
r
to select
Wireless Information
and press
OK
�
Quick Menu
More Information
Personal Mode
3D Settings
Picture size Wide
Picture Mode Standard
TV Speakers
Channel Options
REGZA-LINK Device
00:00
Sleep Timer
Speakers
Recording Information
Wireless Information
Headphone Level
30
2
The
Wireless Information
window will appear�
Note:
Press the
RED
button to scan for all detected
APs (depending on the input mode will not be
operated.).
Item Description
Status
Connected
is displayed when the TV
is connected with the AP�
Disconnected
is displayed when the
TV is not connected with the AP�
Signal Connection signal strength with AP
(
STRONG
/
MEDIUM
/
WEAK
)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel Channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connected with the AP�
TV MAC
Address
The MAC address of the TV is
displayed�
DHCP
Enabled
is displayed when using
DHCP�
Disabled
is displayed when not using
DHCP�
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default Gateway Address of the Default GATEWAY
DNS Address of the DNS
Note:
Even if an AP for IEEE 802.11n is used when
Encryption is set to
WEP
or
TKIP
, the Speed value
might be low. It is recommended that
Encryption
be changed to
AES
.
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz band for audio and video
streaming if bit rate of content is 10Mbps or less.
• It is recommended to use IEEE 802.11n on 5 GHz
band for video streaming if bit rate of content is
20 Mbps or less.
• It is not recommended to use 2.4 GHz band for
audio and video streaming.
• Content playback may not be interrupted by
various network interference.
• Some contents on internet playback may be
interrupted.
Advanced Network Setup
Notes:
• When the DHCP function of the router connected
with this TV is On, you can set
Auto Setup
to
On
or
Off
.
(This should usually be set to
On
.)
• When the DHCP function of the router is Off,
set
Auto Setup
to
Off
, and set the IP Address
manually.
IP Address Setup
Auto Setup:
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Advanced Network Setup
,
and press
OK
�
Network Type Wired
Advanced Network Setup
Network Setup
Wireless Setup
3
Press
s
or
r
to select
IP Address Setup
, and
press
OK
�
IP Address Setup
DNS Setup
MAC Address
Advanced Network Setup
4
Select
Auto Setup
and press
v
or
w
to select
On
�
Auto Setup On
Subnet Mask
IP Address Setup
IP Address
. . .
. . .
Default Gateway
. . .
110920c1_55WL800AZ_En.indb 59 11.9.21 11:37:34

Toshiba 55WL800AZ Specifications

General

Brand	Toshiba
Model	55WL800AZ
Category	LCD TV
Language	English