134
Exploring Your Options
Exchanging data with another computer
5 To verify that the modem is set up properly, select the modem
you wish to check and then click Properties to bring up the
dialog box with information specific to that modem.
6 Click the Diagnostics tab, and then click Query Modem.
Windows 2000 communicates with the modem and displays
identifying information reported by the modem. If
Windows2000 cannot communicate with the modem, it
displays an error message. Consult the troubleshooting
sections of your modem and Windows 2000 documentation.
7 Click OK to close the properties dialog box for that specific
modem.
8 Click OK to close the Modem Properties dialog box.
9 Close the Control Panel.
Connecting the modem to a telephone line
Before you can use the modem, you must connect it to a standard
voice-grade telephone line. For more information, see
“Connecting your modem to a telephone line” on page 80.
TECHNICAL NOTE: If you are using the telephone line at
home, disable Call Waiting before you connect through the
modem. Call Waiting interrupts data transmission.
Connecting your computer to a network
You can connect your computer to a network to increase its
capabilities and functionality using one of its communication
ports.
To Next Page
Loading...
Need help?
General