211
Troubleshooting Guide
Resolving a hardware conflict
AccuPoint II problems
Some of the keyboard problems already listed may affect the
AccuPoint II. In addition:
Your finger slides off the AccuPoint II easily.
If the AccuPoint II cap is oily, remove the cap and clean it with a
cotton swab dipped in rubbing alcohol.
To remove the cap:
1 Firmly grasp the cap and pull it straight up.
Removing the AccuPoint II cap
2 After cleaning the cap, position it on the peg and press it into
place.
NOTE: The peg is square, so be careful to align the cap’s
hole with the peg.
Display problems
The screen is blank.
Display Auto Off may have taken effect. Press any key to
reactivate the screen.
To Next Page
Loading...
Need help?
General