Sorting Alternately One Set by One - ALTERNATION - 83
Sorting Alternately One Set by One - ALTERNATION -
When you make several sets of copies, the copies can be sorted and made to exit alternately
one set by one. This is called alternation. You need to place copy paper in one drawer in a land-
scape direction and place that of the same size in another drawer in a portrait direction in
advance.
LT size is available for this function.
1
Place paper in the drawer.
2
Place the original.
3
Key in the desired number of copies.
4
Select “FINISHING” in the copy menu, and then press the [ENTER]
button.
5
Select “ALTERNATION”, and then press the [ENTER] button.
The alternation is set.
6
Select the other copy modes as required, and then press the
[START] button.
PAPER TYPE
JOB BUILD
EDGE ERASE
ANNOTATION
IMAGE SHIFT
DUAL PAGE
FINISHING DUPLEX
JOB MEMORY
XY ZOOM
ID CARD
2IN1/4IN1
FINISHING SORT
NONSORT
ALTERNATION
To Next Page
Loading...
Need help?
General
