Setting up Remote Operator Panel
This application enables you to interact with the printer control panel even when you are not physically near the network
printer. From your computer, you can view the printer status, release held print jobs, create bookmarks, and do other
print-related tasks.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Click Settings > Remote Operator Panel Settings.
3 Select the Enable check box, and then customize the settings.
4 Click Submit.
To use the application, click Remote Operator Panel > Launch VNC Applet.
Exporting and importing a configuration
You can export configuration settings into a text file, and then import the file to apply the settings to other printers.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2 Export or import a configuration file for one or multiple applications.
For one application
a Navigate to:
Settings > Apps > Apps Management > select an application > Configure
b Export or import the configuration file.
Notes:
• If a JVM Out of Memory error occurs, then repeat the export process until the configuration file is
saved.
• If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
For multiple applications
a Click Settings > Import/Export.
b Export or import a configuration file.
Note: When importing a configuration file, click Submit to complete the process.
Setting up and using the home screen applications 18
To Next Page
Loading...
Need help?
General