Paper and specialty media guide
Notes:
• Make sure that the paper size, type, and weight are set correctly on the computer or on the control panel.
• Flex, fan, and straighten specialty media before loading them.
• The printer may print at a reduced speed to prevent damage to the fuser.
Using specialty media
Tips on using letterhead
• Use letterhead designed specifically for laser printers.
• Print a test page on the letterhead being considered for use before buying large quantities.
• Before loading letterhead, flex, fan, and straighten the stacks to prevent sheets from sticking together.
• Page orientation is important when printing on letterhead.
Source Printing Printable side Paper orientation
Trays
One‑sided Faceup Load the sheet
with the top edge
entering the
printer first.
Trays
Two‑sided Facedown Load the sheet
with the bottom
edge entering the
printer first.
Note: Check with the manufacturer or vendor to determine whether or not the preprinted letterhead is acceptable
for laser printers.
Paper and specialty media guide 49
To Next Page
Loading...
Need help?
General