6 Load the paper stack with the recommended printable side faceup.
7 Place the paper guides securely against the edges of the paper.
8 Insert the tray.
9 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in
the tray.
Note: Mixing paper sizes or paper types in a tray may cause jams.
Loading the 650‑sheet duo tray
The 650‑sheet duo tray (Tray 2) consists of a 550‑sheet tray and an integrated 100‑sheet multipurpose feeder. The tray
is loaded in the same way as the 250‑sheet tray and the optional 550‑sheet tray, and supports the same paper types
and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
Loading paper and specialty media 41
To Next Page
Loading...
Need help?
General