The displayed values in
the
multi-informa-
tion display indicate general driving condi-
tions. Accuracy varies with driving habits
and road conditions.
When the engine switch is on, the last
previously used mode displayed
just
be-
fore
the
engine switch is off will appear.
If
the
electrical power source has been
disconnected from
the
multi-information
display,
the
display will
automatically
be
set
to
the initial mode.
When the instrument panel lights are
turned on, the brightness of
the
display
will be reduced.
&CAUTION
operate
the
switches
with
due
care
while
you
are
driving
to
avoid
acci-
dents.
OUTSIDE TEMPERATURE
DISPLAY
The
display
indicates
between
the
range
of
-40°C
(-40°F)
and
50°C
(122°F).
If
an abnormality exists in
the
connection
of the outside air
temperature
sensor,
,,_oC"
will appear on
the
display. If
"_oC"
appears, contact your Toyota deal-
er.
AVERAGE
FUEL
CONSUMPTION
("AVG.
L/100
km"
or
"AVG.
km/I")
Average
fuel
consumption
is
calculated
and
displayed
based
on
total
driving
distance
and
total
fuel
consumption
with
the
engine
running.
To
reset the calculations, push and hold
the
"RESET" button (on
the
multi-informa-
tion display) for more than 1 second.
INSTANTANEOUS
FUEL
CONSUMPTION
("L/100
km"
or
"km/I")
The
instantaneous
fuel
consumption
is
calculated
and
displayed
based
on
dis-
tance
and
fuel
consumption
with
the
engine
running.
Note
that
an
accurate
figure may not be
shown in the
following
cases.
• The vehicle is
stopped
with
the
engine
running. (The
display
will indicate
the
extremely high fuel consumption.)
• The vehicle is
driving
down a long
slope, applying
the
engine brake. (The
display will
indicate
the
extremely
low
fuel consumption.)
The calculation is reset when
the
engine
switch is turned off.
149
To Next Page
Loading...
Need help?
General
