Replacement
with
used
wheels is
not
rec-
ommended
as
they
may
have
been sub-
jected
to
rough
treatment
or
high mileage
and could fail
without
warning. Also, bent
wheels which have been
straightened
may
have
structural
damage
and
therefore
should
not be used.
Never
use an inner
tube
in a leaking wheel which is
designed
for a
tubeless
tire.
&
CAUTION
Observe
the
following instructions.
Otherwise, an accident may occur re-
sulting in death or serious injuries.
• Do not use wheels
other
than
the
manufacturer's
recommended size,
as this may cause
dangerous
han-
dling
characteristics
resulting in
loss of control.
•
Four-wheel
drive
models:
Do not use wheels
of
different
brands, sizes and types, as this
may cause
dangerous
handling
characteristics resulting in loss
of
control.
252
Aluminum wheel precautions
• When
installing
aluminum
wheels,
check
that
the wheel nuts are
tight
after driving
your
vehicle
the
first
1600
km
(1000 miles).
• If you
have
rotated, repaired, or
changed
your
tires,
check
that
the
wheel nuts are still
tight
after driving
1600 km (1000 miles).
• When using
tire
chains, be careful not
to
damage
the
aluminum
wheels.
• Use
only
Toyota wheel nuts and
wrench
designed
for
your
aluminum
wheels.
• When balancing
your
wheels, use only
Toyota
balance
weights
or equivalent
and a plastic
or
rubber hammer.
• As with any wheel,
periodically
check
your
aluminum
wheels
for
damage.
If
damaged, replace
immediately
.
To Next Page
Loading...
Need help?
General
