Too
high
~
Keep as low
on
hips
as
possible
H13016
Remove excess length of
the
belt and
adjust the belt position.
To
shorten the belt, pull the
free
end
of
the belt.
Position the lap belt as
low
as
possible
on
your
hips-not
on
your
waist,
then
adjust
it to a snug fit.
Lt.
CAUTION
Both
high-positioned
and
loose-fit-
ting lap belts could cause death or
serious injuries due
to
sliding under
the
lap belt during a collision or oth-
er unintended event. Keep the lap
belt positioned as low on hips as
possible.
40
To
release the belt, press the buckle
release button.
Vehicles with
front
bench seat:
Always
place
the
latched belt on the cen-
ter
seat
when
not
in use.
-Seat
belt pretensioners
The driver and front passenger seat
belt pretensioners (vehicles with sepa-
rate front seats) or driver and front out-
side passenger seat belt pretensioners
(vehicles with bench front seat) are de-
signed to be activated in response to
a severe frontal impact.
When
the
sensor
detects
a
severe
frontal
impact,
the
front
seat
belts are
quickly
drawn
back
by
the
retractor
so
that
the
belts
snugly
restrain
the
occupants.
The
seat
belt
pretensioners
are
activated
even with no
passenger
in the
front
seat.
The
seat
belt
pretensioners
and SRS air-
bags may
not
operate
together
in all colli-
sions.
To Next Page
Loading...
Need help?
General
