5.
Position the jack at the correct
jack
points as shown.
Two-wheel
drive
models
Front-Under
the
side
rail
Rear-Under
the
rear axle housing
Four-wheel
drive
models
Front-Under
the
cross
member
Rear-Under
the
rear
axle
housing
Make sure the
jack
is positioned on a
level and solid place.
208
-Raising
your vehicle
40H006
6. After making sure no one is in the
vehicle, raise it high enough so that
the spare tire can be installed.
Remember you will need more ground
clearance when putting on
the
spare
tire
than when removing
the
flat
tire.
To
raise the vehicle,
insert
the
jack
handle
end into
the
jack
(it is a loose fit) and
turn it
clockwise
with
the
wheel nut
wrench, making
sure
the wheel nut wrench
remains
firmly
fitted
onto
the
jack
handle
extension. As
the
jack
touches
the
vehicle
and begins
to
lift,
double-check
that
it is
properly positioned.
&
CAUTION
Never get under
the
vehicle when the
vehicle is supported by the
jack
alone.