Name: TP-Link ARCHER C1200
Brand: TP-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 4

Set Up Internet Connection

4. 1. Use Quick Setup Wizard

The Quick Setup Wizard will guide you to set up your router.

Tips:

If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection.

Follow the steps below to set up your router.

1. Visit

http://tplinkwifi.net, and log in with the password you set for the router.

2. Click

Quick Setup on the top of the page. Then follow the step-by-step instructions

to connect your router to the internet.

3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS,

and more), log in with your TP-Link ID or click

Resigter Now to get one. Then follow the

instructions to bind the cloud router to your TP-Link ID.

Note:

• To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service section.

• If you do not want to register a TP-Link ID now, you may click Log In Later to proceed.

• If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,

all your wireless devices must use the new SSID and password to connect to the router.

4. 2. Manually Set Up Your Internet Connection

In this part, you can check your current internet connection settings. You can also

modify the settings according to the service information provided by your ISP.

Follow the steps below to check or modify your internet connection settings.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Basic > Internet.

3. Select your internet connection type from the drop-down list.

Other manuals for TP-Link ARCHER C1200

Questions and Answers:

Need help?

Do you have a question about the TP-Link ARCHER C1200 and is the answer not in the manual?

General