Name: TP-Link ARCHER C1200
Brand: TP-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 14

Customize Your Network Settings

14. 1. Change the LAN Settings

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to

its web management page. The LAN IP address together with the Subnet Mask also

defines the subnet that the connected devices are on. If the IP address conflicts with

another device on your local network or your network requires a specific IP subnet, you

can change it.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > Network > LAN.

3. Type in a new IP Address appropriate to your needs. And leave the

Subnet Mask as

the default settings.

4. Click Save.

Note:

If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same

subnet with the old one, then you should reconfigure these features.

14. 2. Configure to Support IPTV Service

Configure IPTV setup to enable Internet/IPTV/Phone service

provided by my internet service provider (ISP).

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or

the password you set for the router.

2. Go to

Advanced > Network > IPTV.

3. If your ISP provides the networking service based on IGMP

technology, e.g., British Telecom(BT) and Talk Talk in UK:

1 ) Tick the

IGMP Proxy checkbox and select the IGMP

Version

, either V2 or V3, as required by your ISP.

I want to:

How can

I do that?

Other manuals for TP-Link ARCHER C1200

Questions and Answers:

Need help?

Do you have a question about the TP-Link ARCHER C1200 and is the answer not in the manual?

General