TP-Link TL-R480T+ User Manual

-104-
Type 210.10.10.0/24 in the Subnet/Mask field on Remote Management page and enable the entry as the
following figure shows.
Then type the corresponding port number in Web Management Port and Telnet Management Port fields
as the following figure shows.
Finally, start the web browser and type 210.10.10.50 in the URL field to log in the Web management
page of the Router.
4.8.1.3 Remote Management
On this page you can configure the Remote Management function. This feature allows managing your
Router from a remote location via the Internet.
Choose the menu Maintenance→Setup→Remote Management to load the following page.
Figure 4-71 Remote Management
The following items are displayed on this screen:
¾ Remote Management
Subnet/Mask: Specify a single IP address or network address for the hosts desired to
access the Router from external network.
Status: Activate or inactivate the entry.

TP-Link TL-R480T+ Specifications

General

Load Balancing	Yes
Power Supply	100-240V AC, 50/60Hz
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Firewall	Yes
VPN	PPTP, L2TP, IPSec
VPN Support	Yes
QoS	Yes
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Network Protocols	TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP
Management	Web-based
Device Type	Router
Firewall Features	IP Filtering, Domain Filtering
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)