-111-
Port: Displays the detected WAN port.
Detection: Displays whether the Online Detection is enabled.
WAN Status: Display the detecting results.
4.8.5 Time
System Time is the time displayed while the Router is running. On this page you can configure the
system time and the settings here will be used for other time-based functions like Access Rule, PPPoE
and Logs.
Choose the menu Maintenance→Time→Time to load the following page.
Figure 4-80 Time
The following items are displayed on this screen:
¾ Current Time
System Time: Displays the current date and time of the Router.
Time Zone: Displays the current time zone of the Router.
Status: Displays the status of time capturing
¾ Config
Get GMT: When this option is selected, you can configure the time zone and the
IP Address for the NTP Server. The Router will get GMT automatically
if it has connected to a NTP Server.
z Time Zone: Select your local time.
z Primary/Secondary NTP Server: Enter the IP Address for the NTP
Server.
To Next Page
Loading...
Need help?
General
