-112-
Manual: With this option selected, you can set the date and time manually.
Synchronize with
PC’S Clock:
With this option selected, the administrator PC’s clock is utilized.
Note:
● If Get GMT function cannot be used properly, please add an entry with UDP port of 123 to the
firewall software of the PC.
● The time will be lost when the Router is restarted. The Router will obtain GMT time automatically
from Internet.
4.8.6 Logs
The Log system of Router can record, classify and manage the system information effectively.
Choose the menu Maintenance→Logs→Logs to load the following page.
Figure 4-81 Logs
¾ List of Logs
List of Logs displays the system log information in log buffer. An entry of log contains the following four
parts:
¾ Config
Enable Auto-refresh: With this option selected, the page will refresh automatically every 5
seconds.
Severity: Displays the severity level of the log information. You can select a
severity level to display the log information with the same level.
Send System Logs: Select Send System Logs and specify the server IP, then the new
added logs will be sent to the specified server.
The Logs of switch are classified into the following eight levels.
To Next Page
Loading...
Need help?
General
