-94-
Enable Logs:
Specify whether to log the E-Bulletin.
¾ E-Bulletin
Title:
Enter a title for the bulletin.
Content:
Enter the content of the bulletin.
Object:
Select the object of this bulletin. Options include:
z ANY: The bulletin will be released to all the users and the PCs on the
LAN.
z Group: The bulletin will be released to the users in the selected group.
You can click < > button to add a group to the selected group
and click <
> to remove a group from the selected group.
Group is created on User Group→Group page.
Effective Time:
Specify the effective time for the bulletin. Only one bulletin can be set for
Publisher:
Enter the name of the bulletin's publisher.
Description:
Enter the description for the bulletin.
Status:
Activate or inactivate the entry.
¾ List of E-Bulletin
w the existing bulletins and edit them by the Action button.
The No.1 entry in Figure 4-63 indicates: this bulletin is released by the administrator, and it is
the object at the same time.
In this table, you can vie
released to the Group1 from 8am to 20pm on Thursday and Friday every a bulletin interval. (the
interval in the figure is 30 min). This entry is enabled.
Tips:
For the configuration for groups and users, please refer to the User Group section.
you to assign a fixed domain name to a dynamic WAN IP
4.7.3 Dynamic DNS
DDNS (Dynamic DNS) service allows
address, which enables the Internet hosts to access the Router or the hosts in LAN using the domain
names.
To Next Page
Loading...
Need help?
General
