TP-Link TL-R480T+ User Manual

-19-
4.3 Network
4.3.1 WAN
4.3.1.1 WAN Mode
TL-R480T+ provides four available WAN ports. You can set the number of WAN ports on this page.
Choose the menu Network→WAN→WAN Mode to load the following page.
Figure 4-6 WAN Mode
¾ WAN Mode
WAN Ports:
Select the total number of WAN ports you prefer to use.
And the Router will adjust the physical ports
accordingly, which can be illustrated on the following
port sketch.
Note:
● By default, TL-R480T+ is set to work in the mode of dual WAN ports.
● Any change to the number of WAN ports may lead to a loss of current configurations. Please be
sure to backup your configurations in advance.
4.3.1.2 WAN1
TL-R480T+ provides the following six Internet connection types: Static IP, Dynamic IP, PPPoE/Russian
PPPoE, L2TP/Russian L2TP, PPTP/Russian PPTP and BigPond. To configure the WAN, please first
select the type of Internet connection provided by your ISP (Internet Service Provider).

TP-Link TL-R480T+ Specifications

General

Brand	TP-Link
Model	TL-R480T+
Category	Network Router
Language	English