TP-Link TL-R480T+ User Manual

-63-
¾ Bandwidth Control Rule
Direction:
Select the data stream direction for the entry. The direction of arrowhead
indicates the data stream direction WAN-ALL means all WAN ports
through which the data flow might pass. Individual WAN port cannot be
selected after WAN-ALL rules are added.
Group:
Select the group to define the controlled users.
Mode:
Individual: The bandwidth of each user equals to the current bandwidth
of this entry.
Shared: The total bandwidth of all controlled IP addresses equals to the
current bandwidth of this entry.
Guaranteed
Bandwidth (Up):
Specify the Guaranteed Upstream Bandwidth for this entry.
Limited Bandwidth
(Up):
Specify the Limited Upstream Bandwidth for this entry.
Guaranteed
Bandwidth (Down):
Specify the Guaranteed Downstream Bandwidth for this entry.
Limited Bandwidth
(Down):
Specify the Limited Downstream Bandwidth for this entry.
Effective Time:
Specify the time for the entry to take effect.
Description:
Give a description for the entry.
Status:
Activate or inactivate the entry.
¾ List of Rules
You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 4-37 indicates: The users within group “sales” share the bandwidth and the
Downstream/Upstream Guaranteed Bandwidth is 5000kbps, while the Downstream/Upstream Limited
bandwidth is 10000kbps. This entry takes effect at 8 a.m. to 10 p.m. from Monday to Friday.

TP-Link TL-R480T+ Specifications

General

Load Balancing	Yes
Power Supply	100-240V AC, 50/60Hz
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Firewall	Yes
VPN	PPTP, L2TP, IPSec
VPN Support	Yes
QoS	Yes
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Network Protocols	TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP
Management	Web-based
Device Type	Router
Firewall Features	IP Filtering, Domain Filtering
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)