Universal Robots UR10 Service Manual

All rights reserved 100 Servicemanual_UR10_en_3.1.3
5.3.5 Checklist after a collision
Checklist after a collision
Remove lid and inspect
parts inside of joint
Visually inspect robot arm.
Are any parts visually damaged, like damages on
one of the blue lids?
Stop robot program and eventually press the
Emergency button prior to entering the work cell
Press free drive button on back of TP and check
the free drive function of all joints > any abnormal
friction or behavior observed?
Inspect joint with abnormal
behavior
Check log history for error messages and consult
the section Error Codes for detailed explanation
YES
YES
NO
NO
Press free drive button on back of TP and check
the free drive function of all joints > any excessive
noise observed?
YES
NO
Inspect joint with abnormal
noise. If click noises appear,
check brake pin
Start the robot program in reduced speed and
verify robot is running as intended
NO

Universal Robots UR10 Specifications

General

Brand	Universal Robots
Model	UR10
Category	Robotics
Language	English