Uponor Smatrix Move PLUS User Manual

UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
12
UPONOR SMATRIX MOVE PLUS · QUICK GUIDE
QUICK GUIDE
15. Thermostat T-166, T-167 and T-168
15.1 Press and hold the OK button on the
thermostat for about 5 seconds to enter the
settings menu. The settings icon and menu
numbers are displayed in the top right corner
of the display.
15.2 Use buttons - or + to change the numbers
to 04 and press OK. Current control mode is
displayed (RT, RFT, RS or RO).
15.3. Use buttons - or + to change control mode to
RO and press OK.
15.4 Use buttons - or + to change the numbers
to 09 and press OK. The text Int YES
is displayed, if the thermostat already is
registered as a reference room thermostat.
15.5. Use buttons - or + to change Int YES to Int
CNF.
15.6. The connection indicator starts fl ashing in
the thermostat display to show that the
registration process begins.
15.7 The current outdoor temperature is shown in
the controller display, and the text Int YES
is shown in the thermostat display when the
registration is complete.
15.8 Press and hold the OK button on the
thermostat for about 5 seconds to exit the
settings menu, or wait about 70 seconds for
the software to exit itself.
Thermostat T-163
15.1 Gently press and hold the registration button
on the thermostat, release when the LED
starts fl ashing green (located in the hole
above the registration button).
15.2 The current outdoor temperature is shown in
the controller display when the registration
is complete. It might take some time for the
thermostat to send the current temperature
data to the controller. 00.0 is displayed in the
meantime.
16. Press the OK button on the controller to confi rm
the change and return to the system parameter
settings.
End registration
NOTE!
If system parameter settings are to be
changed, go to section Setup the system >
Step 3.
17. Use buttons < or > to locate parameter 24 (End)
– Exit system parameter settings.
18. Press the OK button to exit the system parameters
menu.
Setup the system
Change the system parameter settings to setup the
system.
13
14
C
12
15 11
16
C
10
17
1 2
3
4
5
6
7
9
18 8
19
C
7
20 6
21 5
22 4
23 3
24
2
0h
0h
1
1
0h
0h 2 10 12 14 16 18 20
C
P
C
AUTO
22 24468
1 2
3
4
5 6
24
24
10 s

Uponor Smatrix Move PLUS Specifications

General

Brand	Uponor
Model	Smatrix Move PLUS
Category	Thermostat
Language	English