Vaisala HMP110REF User Manual

RHLIMIT [max_rh]<cr>
Syntax Description
max_rh
Maximum reading of the RH parameter. Possible
values are 100.0 … 120.0. The default value is
100.0.
Example (extend the maximum RH reading to 120 %):
rhlimit 120
Max. RH % : 120.0 %RH
Example (on analog output, extend the maximum RH reading to 120 % and scale the RH
output on channel 2 from (0 … 1 V) 0 … 100 % to (0 … 1 V) 0 … 120 %):
rhlimit 120
Max. RH % : 120.0 %RH
asel ?
Ch1 T lo : -20.00 'C ?
Ch1 T hi : 80.00 'C ?
Ch2 RH lo : 0.00 %RH ?
Ch2 RH hi : 100.00 %RH ? 120
More information
‣
Set analog output parameters and scaling (page 49)
6.10.6 Display command list
Use the HELP command to display a list of the currently available commands.
HELP<cr>
6.10.7 Display the currently active errors
Use the ERRS command to display the currently active error codes.
ERRS<cr>
Example (no active errors):
errs
0000h
No errors
HMP60 and HMP110 Series User Guide M211060EN-J
52

Vaisala HMP110REF Specifications

General

Brand	Vaisala
Model	HMP110REF
Category	Measuring Instruments
Language	English