• Handle ESD‑sensitive components on a properly grounded and protected ESD workbench
or by grounding yourself to the equipment chassis with a wrist strap and a resistive
connection cord.
• If you are unable to take either precaution, touch a conductive part of the equipment
chassis with your other hand before touching ESD‑sensitive components.
• Hold component boards by the edges and avoid touching component contacts.
2.5 Regulatory compliance
HMP60 and HMP110 series probes are in conformity with the provisions of the following EU
directive(s):
• ROHS Directive
• EMC Directive
The electromagnetic compatibility of HMP60, HMP110, HMP110T, and HMP110REF has been
tested according to the following product family standards:
• EN 61326-1: Electrical equipment for measurement, control and laboratory use - EMC
requirements – for use in industrial locations.
• EN 55022 Class B: Information technology equipment - Radio disturbance characteristics
- Limits and methods of measurement.
The electromagnetic compatibility of HMP63 and HMP113 has been tested according to the
following product family standards:
• EN 61326-1: Electrical equipment for measurement, control and laboratory use - EMC
requirements – Basic immunity test requirements.
• EN 55022 Class B: Information technology equipment - Radio disturbance characteristics
- Limits and methods of measurement.
Chapter 2 – Product overview
21
To Next Page
Loading...
Need help?
General
