Figure 1 HMP60 and HMP110 series probes
1 HMP60 IP65 rated stainless steel probe with INTERCAPâ sensor. Rugged probe for
demanding applications. Two analog output channels.
2 HMP110 IP65 rated stainless steel probe with HUMICAPâ 180R sensor. Rugged
probe with higher accuracy for demanding applications. Analog and digital
output options (selected in order configuration). Note that when HMP110 is
ordered as a digital probe, analog output channels are not available.
3 HMP110T IP65 rated stainless steel probe with temperature sensor only. Has the same
temperature measurement performance as HMP110. One analog output
channel.
4 HMP110REF IP65 rated stainless steel probe. Does not measure; instead, outputs
constant humidity and temperature readings on serial line. Useful for
validating installations of HMT120 and HMT130 transmitters, for example.
Digital output only.
5 HMP63 IP54 rated probe with PC/ABS plastic housing and INTERCAPâ sensor.
Lightweight probe with faster thermal response time. Not for permanent
outdoor use. Two analog output channels.
6 HMP113 IP54 rated probe with PC/ABS plastic housing and HUMICAPâ 180R sensor.
Lightweight probe with higher accuracy and faster thermal response time.
Not for permanent outdoor use. Two analog output channels.
Used with the Vaisala HM40 handheld meter (requires special software
configuration).
Chapter 2 – Product overview
11
To Next Page
Loading...
Need help?
General
