Valent Controls IOM 8 IOM-C1-0616
Part Number 474626
5. If an existing event is selected, the SELECT
EVENT menu appears. Press Enter to edit
the event or ▼ to underline the DELETE
EVENT menu option. Press Enter to delete
the event from the current schedule.
6. The event menu is identical whether editing
an existing event or creating a new event.
Use ▲ and ▼ to select the desired field and
press Enter to change its value. Press
Enter to complete the change.
7. To temporarily disable an event, change the
Value field from OCCUPIED to UNOCCUPIED.
8. Press SAVE to save the settings in the
controller.
Any request for occupancy from the push button
on a space temperature sensor will be effective
for two hours.
Changing the IP Address
The local display may be used to change the
default network settings of the controller.
WARNING:
Setting the IP address to an incorrect value may
cause the controller to lock up and may require
replacing the controller. Make sure the IP
address, gateway, and subnet mask are set
correctly before saving the new settings.
The controller ships with the following default
settings:
IP ADDRESS: 192.168. 1.101
SUBNETMASK: 255.255.255. 0
1. Push any button on the LCD interface to
refresh the display. If the main menu is not
shown, press the MENU button to return to the
main menu.
2. Press ▼ to move the underline cursor to
SYSTEM SETTINGS and press Enter.
3. Press Enter to select SET TCP/IP
SETTINGS.
To Next Page
Loading...
Need help?
General
