Visonic POWERMAXEXPRESS User Manual

USER SETTINGS
24 D-303974 PowerMaxExpress User's Guide
Enrolling Proximity Tags (optional)
When partition is enabled: Each proximity tag
assigned to a partition will function as determined in
"Setting the User Codes". Therefore, each proximity
tag must be assigned a relevant user code. For
example, proximity tag 3 is assigned to user code 3.
Up to 8 proximity tags can be enrolled to the
PowerMaxExpress control panel.
Proximity tag enrolling involves the following steps:
A. Having entered your Master User Code
successfully (see Entering the User Settings
Menu), Click the button (repeatedly,
if necessary) until the display will read:
E N R O L L P R O X T A G
B. Click . The display will read:
T a g N o : 1
C. Click . The display will prompt you
to initiate a transmission from the chosen tag:
P R E S E N T T A G
D. Present the tag to the MKP-160 keyprox left side.
In response, the “Happy Tune” (- - - –––) will sound
and the display will change to:
T a g N o : 1
A dark box will appear at the far right, indicating that
the chosen tag has been enrolled.
E. Click and enroll the next proximity
tag (2, 3,...8), as described in step D.
F. From this point on, you may continue in several
different directions:
 If you wish to enroll another tag, select the
desired number by:
- Clicking to go up (678.....)
- Clicking to go down (432.....)
- Clicking  <tag#>.
 To return to the main menu, click . This
will bring back the display:
< O K > T O E X I T
You may now review and select any other mode on
the User menu (by clicking or ).
Deleting Proximity Tags
Proximity tag memory locations must be cleared
(enrolled ID must be deleted) before enrolling a new
ID. To delete an existing ID, proceed as follows:
A. Select the desired memory location, as described
in the previous paragraph, steps A-C. If, for
example, you selected Tag No. 5, the display will
read:
T a g N o . 5
B. Click . The display will change to:
< O F F > T O D E L E T E
C. Click . The display will change to:
T a g N o . 5
Note that the dark box at the far right has
disappeared. It is now possible to enroll a new ID. It
is also possible to leave the cleared zone or memory
location free and simply exit to the main menu.
Automatic Arming Option
You can determine that the system will be automatically
armed at any desired time.
Having entered master user code successfully, click
until AUTO ARM OPTION is displayed.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
OKI
enable autoarm
(if this is the current option)
If not satisfied
press
disable autoarm
OKI
disable autoarm
OKI
AUTO ARM OPTION
You may now select any other item on USERS
SETTINGS menu or quit programming process by
clicking . When "<OK> TO EXIT" is
displayed, click
OKI
.
Setting Arming Time
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until the
display will read:
AUTO ARM TIME
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
OKI
arm time_ _ : _ _ A
[time
digits] (e.g.
12:55 A)
arm time 12:55 A
OKI
arm time 12:55 A
AUTO ARM TIME

Visonic POWERMAXEXPRESS Specifications

General

Brand	Visonic
Model	POWERMAXEXPRESS
Category	Security System
Language	English