Visonic POWERMAXEXPRESS User Manual

USER SETTINGS
D-303974 PowerMaxExpress User's Guide 25
Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press "" to enter A (AM), or press "#" to enter P
(PM).
Enabling the Squawk Option
You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob, or by MCM-140 keypad (if
enabled in the keypad configuration).
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the button (repeatedly, if necessary) until
the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
OKI
squawk disable
(if this is the current option)
If not satisfied -
squawk low volume
If not satisfied -
squawk mid volume
If not satisfied
squawk hi volume
If satisfied
OKI
squawk hi volume
For wireless siren, refer to "low", "mid" and "hi"
options as "squawk enable".
You may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is displayed,
click
OKI
.
Setting Time and Time Format
Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
OKI
US FORMAT - 12H
(if this is the current option)
OKI
TIME _ _ : _ _ A
(time
digits] (e.g.
12:55A)
TIME 12:55A
OKI
TIME HH:MM A
Note: To enter “A” - press [  ] or to enter “P” - press [#].
B. If 24h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
OKI
US FORMAT - 12H
EU FORMAT - 24H
OKI
TIME _ _ : _ _
[time
digits] (e.g.
19:55)
TIME 19:55
OKI
TIME 19:55
OKI
TIME HH:MM
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
OKI
.
Setting the Date and Date Format
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until the
display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
OKI
DATE MM/DD/YYYY
If not satisfied
press
DATE DD/MM/YYYY
OKI
DATE _ _ / _ _ /_ _ _ _
[Enter date] (e.g.
01/01/2002)
DATE 01/01/2002
OKI
DATE 01/01/2002
OKI
DATE DD/MM/YYYY
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
OKI
.

Visonic POWERMAXEXPRESS Specifications

General

Brand	Visonic
Model	POWERMAXEXPRESS
Category	Security System
Language	English