26
Maintenance schedule
Your Volvo Penta engine and associated equipment is designed to provide high operational reliability and long
service life. They are constructed to withstand the marine environment while also affecting it as little as possible.
Preventive maintenance in accordance with the maintenance schedule will ensure that it retains these qualities
and avoid unnecessary operational disturbances.
Warranty inspection
The prescribed warranty inspection “First Service Inspection” must be carried out at an authorised Volvo Penta
workshop during this first period of operation. Directions for when and how this is to be carried out can be found
in the Warranty and Service Book.
MAINTENANCE SCHEDULE
WARNING! Read the chapter “Maintenance” thoroughly before starting any mainte-
nance work. It contains directions for performing maintenance in a safe and correct
manner.
IMPORTANT! When both operating time and calendar time is given, the one occurring
first is to apply. Maintenance points marked with are to be carried out at an
authorised Volvo Penta workshop.
Daily before first start
● Engine and engine room. General inspection ............................................... page 29
● Air filter indicator (TAMD122A/P). Inspection ............................................... page 31
● Engine oil. Check level ................................................................................. page 33
● Coolant. Check level..................................................................................... page 38
● Reverse gear. Checking oil level (after start) ................................................ page 61
After the first 10 operating hours
● Reverse gear (ZF/MPM). Cleaning oil strainer ............................................. page 61
After the first 50 operating hours
● Reverse gear (Twin Disc, ZF/MPM). Cleaning oil strainer............................ page 61
● Reverse gear (Twin Disc, ZF/MPM). Changing oil and oil filter
1)
................. page 62
1)
Only certain versions of reverse gear have an oil filter
After the first 150 operating hours
Valve clearances. Check ...................................................................... not illustrated
Every 30–500 operating hours
● Engine oil. Change
1, 2)
.................................................................................. page 33
● Oil filter. Change
1, 2)
...................................................................................... page 34
1)
The oil change interval varies depending on the engine type,
oil grade and sulphur content of the fuel. See page 32.
2)
Engine oil and oil filter must be changed at the same time.
To Next Page
Loading...
