65
Maintenance: Accessories
Disengageable clutch. Lubrication
Use lithium-based grease such as Mobilux EP2,
Statoil Uniway EP2N, Texaco Multifac EP2, Q8
Rembrandt EP2.
Main bearing and clutch mechanism
Lubricate the inner support bearing (with lubricating
nipple), the main bearings, release shaft and the
moving parts in the clutch mechanism with grease.
Lubricate sparingly, 20–30 grams (0.6–1.0 oz ) for
the main bearings.
Lubricate the inner link arms with a few drops of oil.
Release bearing
Lubricate sparingly so the grease is not forced out.
Use grease complying with the recommendations
above.
IMPORTANT! If operated more than 15–20
times a day, the release bearing must be lubri-
cated every 50 operating hours. Otherwise, ev-
ery 500 operating hours.
Side mounted PTO. Lubrication
Stop the engine. Pump 3–4 times in each nipple.
To Next Page
Loading...
Need help?
General
