Volvo Penta TAMD61A User Manual

15
TAMD72A – TAMD72WJ-A
TAMD72WJ-A is a TAMD72A which has been modi-
fied for use with a water jet unit. TAMD72WJ-A has:
l New injection pump with changed settings.
l Different turbo without wastegate
l Oil pipes to suit the new turbo
l New induction manifold
l Higher power
TAMD72A – TAMD72P-A(EDC)
l New injection pump with electronic regulator. The
regulator contains an actuator which acts on the
injector pump control rod and thus affects
the injected fuel quantity (power output)
Design and function
l Electronic box (EDC) added, located beside the
rear fuel filter
l Stop solenoid deleted (the engine is stopped by
the EDC system)
l New turbocharger with integrated wastegate valve
l New rubber mounted junction box located by ex-
haust pipe
l Sensor and monitor for engine oil pressure sep-
arately installed and rubber mounted
l Reinforced insulation on engine cables (convolut-
ed PA66 plastic hose) with moisture-proof con-
nectors
l New alternator with zener diodes, 24V/60A or
12V/60A.
Location of type approval
plates
1. Engine designation
2. Engine serial number
3. Engine product number
4. Reverse gear designation
5. Reverse gear serial number
6. Reverse gear product number
7. Engine designation and product number
8. Serial number/short block number

Volvo Penta TAMD61A Specifications

General

Brand	Volvo Penta
Model	TAMD61A
Category	Engine
Language	English